How to Ease Numb Hands While Cycling

We are a reader supported site. We earn commissions when you buy through links on our site. Learn more.

If you’re a fan of long endurance rides, a commuter, or a weekend warrior on your usual route, you may have experienced numb hands at some point. It’s a common problem among cyclists and one that can take the fun out of your time on the bike.

What causes the numbness in the first place? 

It may only happen occasionally for some of you, and regularly for others. What can you do to prevent or ease the problem?

These are excellent questions, and we have potential answers. Whether or not our suggestions resolve your issues, your solution is out there, you just need to find it.

What Causes Numb Hands?

Hands Nerves Distribution
Photo Credit : Physiopedia

A funny thing about numb hands, they sneak up on you during a ride. You don’t notice or think about it until it’s already a reality. There are many reasons which contribute to your numb hands, but compressed nerves and restricted blood flow are the principal sources.

Those pins and needles you feel result from extreme pressure on the nerve endings that pass through your hands, and in particular, the meaty parts of your palm just below your thumb (Thenar Eminence) and along the exterior toward your pinky finger (Hypothenar Eminence). These are the parts of your hands that normally rest on the bars when you ride.

Scientific names aside, three important nerves, the Median, Radial, and Ulnar Nerves pass through these two zones on their way to your fingers. Their presence explains why hands are so sensitive to touch.

The Radial and Ulnar arteries flow along these corridors as well and get their name from the two bones in our forearms, the Radius, and Ulna.

To get to your actual palm and fingers, they travel through an anatomical tunnel (Carpal) that protects and provides them safe passage.

Geek Tip : How you grasp your handlebars, for how long, and at what intensity determine the amount of pressure put on these important zones. The more pressure, the more your hands become numb.

Cause 1 - Handlebar Palsy

Handlebar Palsy is a medical name to explain tingling in your ring and pinky finger. It’s caused by an irritation of the Ulnar nerve and can lead to total numbness or a loss of hand strength. 

Also known as Cyclists Palsy or Ulnar Neuropathy, it’s a common condition caused by excess pressure on nerve endings and blood vessels in your hands from an overload of road vibrations or poor riding position.

Cause 2 - Carpal Tunnel Syndrome

The Carpal Tunnel you may have heard of is in association with people who type excessively in a non-ergonomic position. It’s an overuse injury and the same principle applies on the bicycle too. 

This is the tunnel we touched on earlier where the nerves, particularly the Median nerve, pass through our palms on the way to the rest of the hand.

As riders flex their wrists to hold handlebars, a similar position to typing, this tunnel gets irritated and inflamed, causing eventual numbness in the thumb, fingers, and hand or a loss of grip strength.

This condition is a nuisance, but not enough for most to see a doctor, so its real prevalence remains unknown.

How to Get Rid of Numb Hands?

Enough of the names, how’s, and whys, we’re here to find out about what you can actually do to ease numb hands when you’re riding. Easing your trauma and putting the joy back into your cycling routine is our mission. 

Let’s jump in.

Wear Padded Cycling Gloves

Giro Supernatural Road Cycling Gloves
Photo Credit : Elastic Interface

Cycling gloves don’t just protect your hands when you fall.

They have padding in strategic places, right over where nerves lay, to reduce road vibrations that pass through the handlebars to your palms. Over an extended ride, especially on rough roads or terrain, vibrations accumulate and irritate the nerves underneath, provoking numbness.

Elastic Interface, a leading cycling pads maker produces various glove padding designs for a specific use such as race, gravel, lightweight, and slim profile. The padding is strategically placed with varying thicknesses to provide maximum support and comfort. Brands such as Giro, dhb, MAAP and Q36.5 are among those who use this technology in their gloves.

Read More : Summer Cycling Gloves Buying Guide

Regularly Change Hand Position on the Handlebar

Giro Supernatural Elastic Interface Gloves

Change is good, and moving your hands around the handlebar will prevent or ease numb hands. I’m a fan of riding on the hoods, but I also use the tops when braking isn’t an issue, like on a long straightaway. I never ride in the drops, but that’s me. Handlebars, for the road at least, are designed for this very purpose, so take advantage of it.

Double Wrap Bar Tape or Use Handlebar Gel Inserts

Double Wrapped Handlebar Tapes

Bar tape is made of vibration absorbing materials like cork and adding a second layer amplifies the relief it provides. Double wrapped bars are a common sight in the cobbled classics such as Paris Roubaix and have a long history of success.

Can the pros be wrong?

A second option is gel inserts placed where you want on the bar and taped over with your usual wrap.

Ensure Saddle Is Not Tilting Downward

Bike Fitting Session

Saddles should be horizontal to the ground. 

Use a spirit level to verify yours. A titled saddle creates a slope, focusing more bodyweight onto the hands which are holding your handlebars. 

In this position, you’re constantly fighting against gravity and that added pressure only amplifies road vibrations. You might not feel it directly, but your hands may be letting you know if they keep going numb.

Read More : How to Prevent (and Treat) Saddle Sores

Consider Getting a Professional Bike Fit

Retul Bike Fit

Chronic numb hands when you ride may be your motivation for having a professional bike fit, but it’s an investment you won’t stop there. 

A fit professional will dial in your position on the bike, verify your pedal and cleats, saddle height, stem length, bar width, and more.

If you’ve got the resources, schedule one today. If you don’t know where to find one, ask your local bike shop.

Read More : 5 Things to Know Before Getting A Bike Fit

Relax Your Hands

Biking is fun, so lighten up on that grip!

There is no need to go white-knuckled holding on to your handlebars.

Relax your shoulders and use your arms as shock absorbers by bending your elbows. Avoid closing your hands completely over the bars as you’ll tend to start pulling. Your legs and core should do the work, not your arms. Your hands and neck will thank you.

Dan Matthews

Dan Matthews

Dan Matthews is an avid cyclist who has raced competitively in the amateur ranks until his mid 30s. He's married with 3 kids aged 5, 7, and 10. Dan loves cycling because of the challenge it offers both physically and mentally, as well as the sense of freedom that comes with riding outside. When not riding or writing about cycling, you can find Dan obsessing himself in his latest hobby, scuba diving.